The process of stainless steel cutting is prone to problems

Stainless steel has brought me a lot of changes, the stainless steel cutting process is prone to problems? Let's talk about it.
Rust steel cutting in the process of easy to present the first problem, the strength of stainless steel is easy to deformation. Stainless steel in the processing and cutting process, because of its elongation is inevitable, especially austenitic stainless steel, there will be a large amount of plastic deformation, which is the inevitable difficulty of cutting. Moreover, the strength of stainless steel itself, strengthen the double resistance in the cutting process, strengthen the cutting strength. Second, stainless steel cutting temperature is high. A large amount of heat will occur in the cutting process, but the thermal conductivity of stainless steel material is poor, so the heat is all concentrated in the cutting area and the blade, not easy to heat dissipation. Third, the difficulty of cutting. Stainless steel is a hard material, good plastic, toughness, but at the time of processing, cutting because it is not easy to break, easy adhesion and lead to cutting extrusion stainless steel profile, resulting in excessive tool wear (this is because the tool wear, resulting in the surface of the tool potholes, forming small peeling and notch; In addition, the hardness of stainless steel is very high, when cutting, direct contact with the tool, friction, abrasion tool, and work hardening phenomenon, will make the tool wear aggravated), so that stainless steel processing deterioration. Fourth, stainless steel is easy to expand. In the cutting process, a large amount of heat will occur, resulting in the expansion of stainless steel, and the difficulty of cutting processing.